Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

3-12 Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
3. Remove the three shipping screws, press the tabs on each side of the
drive compartment, and then pull the drive compartment from the
chassis as shown in Figure 3-6.
4. Remove two screws on each side of the drive to be removed , and then
gently pull the drive out of the drive bay
as shown in Figure 3-12.
2
1
1
Figure 3-12. Removing a hard drive
5. Slide the drive compartment back into the chassis.
6. Connect the power and data cables to the back of all devices.
7. Replace the access panel and the front bezel.
8. Restore power to the server.