Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Hardware Options Installation 3-17
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
3. Slide the drive into the drive bay, as shown in Figure 3-17.
Figure 3-17. Installing a tape drive
4. Connect the data and power cables to the back of the drive, as shown in
Figure 3-14.
5. Remove the two bezel blanks in the front bezel in front of the tape drive.
See “Removing the Bezel Blanks” earlier in this chapter.
6. Replace the access panel and the front bezel.
7. Restore power to the server.