Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Hardware Options Installation 3-19
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
3. Remove the screws on each side of the device .
4. Gently slide the device out from the front of the chassis .
1
1
2
Figure 3-19. Removing a device from the removable media bay
5. Install another device or a drive tray. Replace the bezel blank
(or blanks). See “Removing the Bezel Blanks” and “Removing a
Drive Tray” earlier in this chapter.
6. Replace the access panel and the front bezel. Restore power to
the server.