Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

3-22 Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
3. Insert the expansion board into the slot and secure with a screw on the
top of the board.
Figure 3-22. Installing an expansion board
4. Connect any cables to the expansion board.
To remove an expansion board, reverse steps 1 through 4.
Configuring PCI Devices
Interrupt sharing between PCI devices may occur in certain configurations.
The system setup utility is designed to optimally configure the system.
However, interrupt conflicts may occur between PCI devices. Refer to
Chapter 5, “Server Configuration and Utilities,” for more information on the
setup utility used by your server.
NOTE: Interrupt sharing does not present a problem for like devices, such as two network
interface controllers.