Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

3-24 Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
Installing a Memory Module
The ProLiant ML330e/ML330 server supports PC133-MHz Registered ECC
SDRAM DIMMs. Additional DIMMs (64-MB, 128-MB, 256-MB, or
512-MB) are available to upgrade the memory. The server has four DIMM
sockets located on the system board.
It is not necessary to install DIMMs in pairs, and they can be installed into any
available socket.
4
3
2
1
Figure 3-23. Locating DIMM sockets
Table 3-3
DIMM Sockets
Item Component Item Component
DIMM socket 1 DIMM socket 3
DIMM socket 2 DIMM socket 4