Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Hardware Options Installation 3-25
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
To install a DIMM:
1. Follow the steps in “Removing the Access Panel” at the beginning of
this chapter.
2. Press outward on both latches of the DIMM socket at the same time .
3. Insert the DIMM into the socket .
CAUTION: A DIMM can be installed only one way or damage will result. Be sure
to match the two key slots on the DIMM with the tab on the DIMM socket. Push
the DIMM down into the DIMM socket, ensuring that it is fully inserted and
properly seated.
4. Return latches to the upright position .
1
1
2
3
Figure 3-24. Installing a DIMM