Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

4-4 Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: e-ch4 Cabling Guidelines.doc Last Saved On: 12/27/00 3:27 PM
Identifying and Connecting a
Fast SCSI-2 Device (Narrow)
Some SCSI devices require a special adapter, which is not standard with your
server, to connect with the SCSI cable included with your server.
If you are installing a device that uses a Fast SCSI-2 interface, you must use a
68-to-50 pin SCSI adapter (Part Number 199618-001), shown in Figure 4-3.
This adapter should be installed between the 50-pin interface on the device and
the 68-pin SCSI cable connected to the SCSI connector on the Server
Feature Board.
Figure 4-3. 68-to-50 pin (wide-to-narrow) SCSI adapter