Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Server Configuration and Utilities 5-11
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: f-ch5 Server Configuration and Utilities.doc Last Saved On: 12/27/00 3:28 PM
Advanced Options
The Advanced Options menu is used to configure advanced options of the
system. The following is a list of selections found in this menu with an
explanation of each option:
MPS Table Mode allows the user to change the APIC table setting. This
selection should be automatically set by OS Selection, but it allows the user to
override the automatic selection.
POST Speed Up allows the user to enable or disable the quick or slow start
process. The slow start process performs a complete memory test.
Automatic Server Recovery (ASR) allows the user to enable or disable the
Automatic Server Recovery option.
Wake Support (PME) allows the user to enable or disable Wake
Support (PME).
Floppy Controller allows the user to enable or disable the disk controller.
Primary IDE Controller allows the user to enable or disable the primary IDE
controller.
Secondary IDE Controller allows the user to enable or disable the secondary
IDE controller.
Processor Serial Number allows the user to enable or disable the ability of
applications to read the processor serial number.
Thermal Shutdown allows the user to disable or enable the ability of the
system to shut down due to a thermal caution event. The default for this option
is enabled. Compaq does not recommend disabling this feature.