Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Server Configuration and Utilities 5-13
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: f-ch5 Server Configuration and Utilities.doc Last Saved On: 12/27/00 3:28 PM
SmartStart
The SmartStart and Support Software CD is used to load the system software,
thereby achieving a well-integrated server and ensuring maximum
dependability and supportability. The SmartStart and Support Software CD
contains diagnostic utilities and ROMPaq tools.
NOTE: Do not use the SmartStart and Support Software CD for loading system software if
you purchased your system with a factory-installed operating system. Refer to the
Compaq Factory-Installed Operating System Software User Guide.
To install the SmartStart and Support Software CD, run F10 setup (BIOS
Setup utility) for the ProLiant ML330 server, or F9 setup (RBSU) for the
ProLiant ML330e server, and configure the primary operating system. Next,
follow these steps:
1. With your server powered up, press the disk eject button to open the
CD-ROM tray.
2. Locate the SmartStart and Support Software CD in the Server Setup and
Management pack.
3. Insert the SmartStart and Support Software CD into the CD-ROM drive,
and then restart the system.
NOTE: Handle the CD by its edges, not by the flat surfaces of the disc.
4. When the busy indicator turns green, the SmartStart installation
sequence begins.
Refer to the SmartStart documentation included with your server to
install the operating system, create updated driver diskettes, and run
upgrade utilities.
Compaq Insight Manager
Compaq Insight Manager is the Compaq application for easily managing
network devices. Compaq Insight Manager delivers intelligent monitoring and
alerting as well as visual control of your Compaq devices. Documentation for
Compaq Insight Manager is available on the Compaq Management CD in
[CD-ROM DRIVE]:\OVERVIEW.HLP.