Compaq ProLiant ML330 933MHz Server Overview

Proliant ML330

Rev. 0.41 1 of 2

Compaq ProLiant ML330 Server

933MHz Server Overview

The ProLiant ML330 933MHz server contains the Pentium III processor. This new

model includes all the features of the 667MHz, the 733MHz and the 866MHz

models.

Table 1: Part Numbers and Configuration Codes

Server Model Part Number Configuration Code

ProLiant ML330 933/133 Non-Hot-Plug 160209-001 FSQ1

ProLiant ML330 933/133 Non-Hot-Plug w/HD 160209-002 FSQ2

Distinctive Features of the Upgraded ProLiant ML330

This model brings the following changes to the ProLiant ML330 Pentium III line:

n 933MHz processor with 256KB integrated Level 2 cache

n An updated ROMpaq image dated 06/01/00 or later, accessible from the

Compaq website: http://www.compaq.com/support/files/

Switch Settings

It is not necessary to modify any internal switch settings when implementing the

933MHz server, either as an optional upgrade or as a newly procured system.

Upgrade Options

Table 2 lists spares kit associated with this processor. Refer to TechInfo for a

complete list of options and part numbers.

Table 2: Spare Part Numbers

Server Model Part Number

933MHz/133MHz FSB Pentium III 256K

Processor Spares Kit

202350-001

Software Supported

The 933MHz server supports the same operating system as the 667MHz, the

800MHz, and the 866MHz model servers.

PAGE 1
Proliant ML330 Compaq ProLiant  ML330 Server 933MHz Server Overview The ProLiant ML330 933MHz server contains the Pentium III processor. This new model includes all the features of the 667MHz, the 733MHz and the 866MHz models.
PAGE 2
Proliant ML330 Service Considerations The Pentium III FC-PGA processor cannot be down-clocked; therefore, all processors must use the same frequency. Compaq does not support mixing processor frequencies. During POST, each processor and its initialization frequency is displayed. If POST detects processors of unlike frequency, ROM halts the system. Important Notes ! 2 of 2 Important Class B Regulatory Information —Your server currently complies with the FCC Class B requirements for digital devices.