Quick Setup with Red Hat Linux 7.1 on the Compaq ProLiant ML330 and ProLiant ML330e Servers

"Quick Setup" with Red Hat Linux 7.1 on the Compaq ProLiant ML330 and ProLiant ML330e Servers 7
1528-0501A-WWEN
Figure 2 Choose partitions to Format
7. Format your partitions.
After creating partitions, you are required to format them (see below).
a. Select /dev/hda5/ and /dev/hda1/boot
b. Check the Check for bad blocks while formatting box (optional)
c. Click the Next button.
8. Install LILO.
IMPORTANT: To be able to boot your Red Hat Linux system, you will need to install LILO
(the LInux LOader). LILO can be installed in either: the master boot record (MBR) or the first
sector of your boot partition.
If you install LILO in the MBR, when your machine boots, LILO will display a LILO:
prompt. You are then able to boot Red Hat Linux. If your system will use only Red Hat
Linux, choose the MBR.