Quick Setup with Red Hat Linux 7.1 on the Compaq ProLiant ML330 and ProLiant ML330e Servers

"Quick Setup" with Red Hat Linux 7.1 on the Compaq ProLiant ML330 and ProLiant ML330e Servers 9
1528-0501A-WWEN
Figure 4 Network Configuration
Choose whether you would like to configure your IP address using DHCP
a. By selecting the Activate on boot checkbox, your network interface will start when you
boot your server. If you select the DHCP check box , ignore steps b and c.
b. Type in the IP Address, Netmask, Network, and Broadcast addresses if needed
If you have a fully qualified domain name for the network device, Type it in the
Hostname field.
c. Type the Gateway and Primary DNS (if applicable the Secondary DNS and Ternary
DNS) addresses
d. Click the NEXT button
10. Configure your firewall.