HP Smart Update Manager 6.3.1 Release Notes (Ed. 2)

HP SUM displays the error message “Multiple connections to a server or shared resource by the same
user...”
HP SUM uses the admin$ share function on Windows-based servers to copy files and perform required
operations on remote node servers. If HP SUM detects multiple connections to the remote Windows
node, it might display “Multiple connections to a server or shared resource by the same user, using
more than one user name, are not allowed. Disconnect all previous connections to the server or shared
resource and try again.”
Suggested Action: If HP SUM displays the error check for open admin$ shares on the remote node
you want to update, and remove the connections. Use the following commands to check for open
shares and delete them:
1. Open a command prompt window.
2. Type net use.
3. If open connections on the remote node are found, type:
net use <node_admin_share> /delete
4. Attempt the operation in HP SUM that caused HP SUM to display the error.
Node issues
HP SUM displays an incorrect message, “Generating Report” when analyzing multiple nodes
Suggested Action: Re-analyze the nodes that did not analyze correctly. This will be fixed in a future
version.
HP SUM does not support DNS names with a dash (-) in the name
Suggested Action: Do not use a dash in the DNS name. This will be resolved in a future version.
HP SUM adds the same node twice if the node has IPv4 and IPv6 addresses
Suggested Action: No action. This will be resolved in a future version of HP SUM.
HP SUM does not refresh the Nodes screen after adding a node
Suggested Action: Click the Refresh button on your web browser.
HP SUM does not refresh the inventory message after finishing inventory on a node
Suggested Action: No action. This issue will be resolved in a future version of HP SUM.
HP SUM removes the assigned baseline for a node if you edit a node
Suggested Action: If you edit a node, select the baseline or additional package you want to apply to
the node.
HP SUM Console mode displays an error when you add the localhost by IP address
Suggested Action: No action. When you add the localhost to HP SUM in console mode by IP address,
it displays an error adding the IP address. The localhost can only be added by specifying the name,
localhost.
HP SUM displays “Update returned an error” when deploying the HP Fibre Channel Enablement Kit
for Linux
Suggested Action: View the update log. If you see the error Enablement kit is not supported
for the installed driver version, use the following instructions to work around this issue:
1. Install HBA drivers before installing the Enablement kit.
2. Make sure the driver and Enablement kit version match.
This known issue will be resolved in a future version.
18 Issues and suggested actions