Configuring and using DDR3 memory with HP ProLiant Gen8 Servers

13
For more information, you should consult the User Guide:
hp.com > support & drivers > product support & troubleshooting > enter your product
Figure 5 shows the memory slot configuration for 16 slot 2P ProLiant Gen8 servers. The configuration is similar to the to
the 24 slot servers. However, 16 slot servers have only 2 DIMM slots per channel. Once again, the first memory slots for
each channel on each processor are the white memory slots (A, B, C, and D). You should populate the memory for 16 slot
servers using the same rules as those for 24 slot servers.
Figure 5. DIMM slots and population order for 16 slot 2P ProLiant Gen8 servers.
Figure 6 shows the memory slot configuration for the 12 slot 2P ProLiant Gen8 servers that use the E5-2400 series
processors. These servers have only three memory channels per processor. The first memory slots for each channel on
each processor are the white memory slots (A, B, and C). You should populate the memory for 12 slot servers using the
same general rules as those for 24 and 16 slot servers.