HP ProLiant ML350e Gen8 v2 Server Maintenance and Service Guide

Removal and replacement procedures 36
5.
Remove the access panel ("Access panel" on page 26).
6. If installed, remove the PCI air baffle ("PCI air baffle" on page 27).
7. Remove the system air baffle ("System air baffle" on page 28).
8. Remove any installed full-length PCI cards ("Full-length expansion board" on page 41).
9. Remove the fan modules and the fan blank ("Fan modules and fan blank" on page 31).
10. Disconnect the power cables from the system board, drive cages, and optical drive.
11. Remove the power supply.
To replace the component, reverse the removal procedure.
Power supply modules
To remove the component:
In a redundant power supply configuration: