HP ProLiant ML350e Gen8 v2 Server Maintenance and Service Guide

Removal and replacement procedures 42
5.
Remove the access panel ("Access panel" on page 26).
6. If installed, remove the PCI air baffle ("PCI air baffle" on page 27).
7. Open the PCI slot cover retaining bracket.
8. Release the expansion board retaining bracket and remove the expansion board.
9. If a full-length expansion board is installed on the fan holder, remove the expansion board.
IMPORTANT: If removing an expansion board from PCI slot 2, release the retainer latch on the
system board, and then remove the expansion board from the system.