HP Intelligent Provisioning 1.00 Release Notes

• No online help is available for the Step 2: Activation page. The missing information is:
Use this page to activate or disable Intelligent Provisioning. If you activate Intelligent Provisioning,
you can access it during server POST with F10 to set up and maintain your HP ProLiant Gen8
server. If you disable Intelligent Provisioning, the F10 key will no longer activate Intelligent
Provisioning when the server reboots.
To re-enable Intelligent Provisioning, from the RBSU Boot Menu, select Server Availability→Intelligent
Provisioning (F10 Prompt)→Enabled.
• In the Step 4: Review page, the online help states Click show details for a detailed list of the
installation. The details will always appear on the page so you do not need to click anything to
see them.
• No detailed information is provided under Initial Network Settings for the Static IPv6 option. The
missing information is:
IPv6 Static — This network connection uses a manually specified Internet Protocol (IP) address. If
you select this option, you must specify an IPv6 address and an IPv6 subnet mask below.
◦ Static IP Address — IPv6 address. The static IPv6 address must be 64-bit, for example 2001::1
or 2001:db8::1:0:0:1.
◦ Gateway Address — This is an optional input field for the IP address of a local IP router on
the same network as the computer that is used to forward traffic to destinations beyond the
local network. This field follows the same format as the Static IP Address field.
• Non-English versions of online help for the Maintenance page on the Select a Path page states
that there are nine tools. There are only eight tools.
Customer advisories
• SUSE Linux Enterprise Server 11 SP1 - Installation With kISO May Yield Mixed Kernel Version
Installations.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03237879
• HP Gen8 Series Servers- Only One Port Is displayed for HP InfiniBand FDR/EN 10/40Gb Dual
Port 544FLR-QSFP Adapter 649282-B21 and HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP
Adapter 649283-B21 Under Certain Versions of SUSE Linux.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03246357
• SUSE Linux Enterprise Server 11 SP1 - Installation of SUSE Linux Enterprise Server 11 SP1 Does
Not Recognize the Chipset on HP ProLiant Gen8-Series Servers.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03237878
• Red Hat Enterprise Linux 6.1 - When Performing an Lspci Command on an HP ProLiant Gen8-Series
Server With the HP Integrated-Lights Out 4 (ILO 4), the Output Will Display iLO3
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03241281
• HP Intelligent Provisioning - "Unable to Find Any Valid Media, Add and Choose Rescan" Message
With HP Intelligent Provisioning in Manual Install Mode for SUSE Linux Enterprise Server 11 SP1
(Or Later) on HP ProLiant Gen8-Series Server.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03245453
6 Customer advisories