HP ProLiant Support Pack 9.10 User Guide

Possible valuesDescriptionParameter
access granted to local users. (Applies to
Linux PSP only.)
HP Systems Management Homepage uses
this parameter to set up the trust relationship
mode. (Applies to Linux PSP only.)
TRUSTMODE
• TrustByCert—If you use this value,
you must define the CERTLIST
parameter to enable access to the
server.
• TrustByName—If you use this
value, you must define the
XENAMELIST.
• TrustByAll—HP does not
recommend using this value
because of possible negative
security consequences.
CAUTION: The accepted values
are case-sensitive and must be
capitalized as shown. Failure to
do so prevents the trust
relationship from being set up
properly during installation and
might affect access to the web
server.
Certificate file name or Server DNS
name
Enables you to provide a list of certificate
files or servers where certificates can be
CERTLIST
obtained for trust relationships for the HP
Systems Management Homepage. (Applies
to Linux PSP only.)
Server DNS nameEnables you to provide a list of servers,
separated by semicolons, for trust
XENAMELIST
relationships for the HP Systems
Management Homepage. (Applies to Linux
PSP only.)
This parameter is valid only if the
TRUSTMODE parameter is set to
TrustByName. (Applies to Linux PSP only.)
The hp_qla2x00 QLogic Fibre Channel
Driver uses this parameter to determine the
HPQLA2X00FO
• SinglePath
• SecurePath
failover mode to use. (Applies to Linux PSP
only.)
• QLogicFailure
NOTE: No default value
Y, N (default)The hp_qla2x00 QLogic Fibre Channel
Driver uses this parameter to determine
HPQLA2X00FORCE
whether to skip detection of third-party
storage. (Applies to Linux PSP only.)
User can define the OAUID variable
multiple times before each HOST
variable.
Provides the user name credentials for the
OA associated with VC. You must define a
value of these variables before the HOST
variable in the [TARGETS] section. This
parameter applies only for VC firmware.
OAUID
You can also use OAUSER or OAUSERNAME.
User can define OAPWD variable
multiple times before each HOST
variable.
Provides the password credentials for the
OA associated with VC. You must define a
value of these variables before the HOST
variable in the [TARGETS] section. This
parameter applies only for VC firmware.
OAPWD
You can also use OAPASSWORD.
36 Advanced topics