HP ProLiant Gen8 Troubleshooting Guide Volume I: Troubleshooting

Diagnostic flowcharts 33
• The server blade has a mismatched fabric installed on the mezzanine 1 connector or the mezzanine 2
connector.
Server blade power-on problems flowchart for Intel server blades
For the location of server LEDs and information on their statuses, see the server documentation on the HP
website (http://www.hp.com/go/hpsc). System power and health LED definitions are also available in
"Component LED definitions (on page 19)."
Symptoms:
• The server blade does not power on.
• The system power LED is off or solid amber.
• The health LED status bar is flashing red or flashing amber.
Possible causes:
• The server blade is not properly installed in the enclosure.