HP ProLiant Gen8 Troubleshooting Guide Volume I: Troubleshooting

Software tools and solutions 78
Warning: The serial number should ONLY be modified by qualified service
personnel. This value should always match the serial number located on the
chassis.
5. Press the Enter key to clear the warning.
6. Enter the serial number and press the Enter key.
7. Select Product ID. The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
8. Enter the product ID and press the Enter key.
9. Press the Esc key to close the menu.
10. Press the Esc key to exit RBSU.
11. Press the F10 key to confirm exiting RBSU. The server automatically reboots.
UEFI System Utilities
At this time, the HP ProLiant DL580 Gen8 Server is the only HP ProLiant Gen8 server that supports UEFI.
For servers that support UEFI, the HP UEFI System Utilities is embedded in the system ROM. The UEFI System
Utilities enable you to perform a wide range of configuration activities, including:
• Configuring system devices and installed options
• Enabling and disabling system features
• Displaying system information
• Selecting the primary boot controller
• Configuring memory options
• Selecting a language
• Launching other pre-boot environments such as the Embedded UEFI Shell and Intelligent Provisioning
For more information on the HP UEFI System Utilities, see the HP UEFI System Utilities User Guide on the HP
website (http://www.hp.com/go/uefi/docs).
Using HP UEFI System Utilities
To use the System Utilities, use the following keys:
Action Key
Access System Utilities
F9 during server POST
Navigate menus
Up and Down arrows
Select items
Enter
Save selections
F10
Access Help for a highlighted configuration option
F1
Default configuration settings are applied to the server at one of the following times:
• Upon the first system power-up
• After defaults have been restored