HP ProLiant ML350p Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 36
ii.
Disconnect each power cord from the server
d. Remove the access panel ("Access panel" on page 29).
e. Remove the rack bezel.
3. Remove the component box blank.
To replace the component, reverse the removal procedure.
Drive blank
To remove the component:
1. Do one of the following:
o For tower models, open and remove the bezel ("Remove the tower bezel" on page 27).
o For rack models, if install, remove the security bezel (on page 27).
2. Remove the drive blank.
To replace the component, reverse the removal procedure.
Drive