HP ProLiant ML350p Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 48
2.
Power down the server (on page 26).
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
o For tower models, place the server on a flat, level surface with the access panel facing up.
o For rack models, extend the server from the rack (on page 28).
5. Remove the access panel ("Access panel" on page 29).
6. Remove the air baffle ("Air baffle" on page 30).
7. Disconnect the capacitor pack cable from the cache module.
8. Remove the cache module.
To replace the component, reverse the removal procedure.
FBWC capacitor pack