HP Smart Update Manager 5.1 User Guide

The following table describes TPM detection scenarios that you might encounter.
ResultScenario
A warning message appears. Select OK to continue. The
installation is not canceled.
If TPM is detected and enabled, the installation is not silent,
and a system ROM must be updated.
No warning appears. A new log file is generated
(%systemdrive%\cpqsystem\log\cpqstub.log).
If TPM is detected and enabled, the installation is silent,
the /tpmbypass switch is not given, and any firmware
updated must be applied to the server. Because the installation is silent, the installation is
terminated and cannot continue.
A warning message appears. After selecting OK, you can
continue. The installation is not canceled.
If TPM is detected and enabled with Option ROM
Measuring, the installation is not silent, and a system ROM
must be updated.
No warning appears. A new log file is generated
(%systemdrive%\cpqsystem\log\cpqstub.log).
If TPM is detected and enabled with Option ROM
Measuring, the installation is silent; the /tpmbypass
Because the installation is silent, the installation is
terminated and cannot continue.
switch the installation is silent, the installation is terminated
and cannot continue. is not given, and any firmware
updated must be applied to the server.
The installation occurs.If TPM is detected and enabled, the installation is silent,
The installation occurs. and the /tpmbypass switch is
supplied.
14 Introduction