HP Smart Update Manager 5.1 User Guide

Possible valuesDescriptionParameter
YES, NOSpecifies that components that use SNMP
protocol, are available to be selected for
installation.
USESNMP
These components are available for
selection by default. When the /usesnmp
parameter is used, and the /usewmi
parameter is not used, the WMI
components are optional. This parameter
does not apply to HP Integrity servers.
YES, NOSpecifies that components that use WMI
protocol are available to be selected for
installation.
USEWMI
These components are optional by default
and are not installed unless this parameter
is used. When the /usewmi parameter
is used, and the /usesnmp parameter is
not used, the SNMP components are
optional. This parameter does not apply
to HP Integrity servers.
YES, NOThis is a filter switch that allows you to
view only the firmware components
required for installation.
ROMONLY
Do not use the /romonly parameter with
the /softwareonly parameter.
YES, NOThis is a filter switch that allows you to
view only the software components
required for installation.
SOFTWAREONLY
Do not use the /softwareonly
parameter with the /romonly parameter.
YES, NOEnables the credentials of the local host
to be used as the credentials to access the
USECURRENTCREDENTIAL
targets instead of providing the user name
and password explicitly for each target.
The assumption is that the current
credentials are valid for the targets that
are being accessed. (Applies to Windows
operating systems only.)
YES, NOInstructs HP SUM to include the
components from the HP FTP site (ftp://
ftp.hp.com) in the list of possible updates.
WEBUPDATENEEDED
String valueUse a proxy server (and port number) to
access the HP FTP site (ftp://ftp.hp.com).
USEPROXYSERVER
For example, 11.22.33.44:80
Web URL (for example, autoproxy.com)Include a proxy script to access the HP
FTP site (ftp://ftp.hp.com).
USEPROXYSCRIPT
YES, NO (default)Instructs HP SUM to delete the input file
after it has been read.
DELETEINPUTFILE
OmitHost (default), OmitComponent,
Force
This parameter instructs HP SUM how to
proceed when a component has a failed
dependency.
ONFAILEDDEPENDENCY
The default of OmitHost causes the host
to be put in a failure state, and no
installation is attempted on it.
46 Using scripts to deploy updates