Configuring Arrays on HP Smart Array Controllers Reference Guide

HP Array Configuration Utility 42
For certain tasks, the controller must have SAAP activated by a registered license key. For more information,
see "About SAAP (on page 8)."
When a controller is selected, the wizards that appear are a subset of the total number of wizards that are
possible for the selected controller. ACU lists or omits wizards based on the controller model and
configuration. For example, if the selected controller has no unassigned physical drives, Expand Array is not
an available wizard.
Wizards are available by selecting the root controller in the Systems and Devices tree. The following list
includes all possible wizards:
• Add Logical Drive
• Controller Settings
• Expand Array
• Express Configuration
• Manage Spare Drive
• Migrate Logical Drive
• Move Array
• Remove Logical Drive
For more information, see "Using Wizards (on page 42)."
The Express Configuration wizard operates differently. See "Using Express Configuration (on page 44)."
Using Wizards
1. Open ACU.
For more information, see "Using the ACU GUI (on page 19)."
If ACU is already open, click the Wizards tab.
2. Select a controller from the Controller/Device menu.