HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 101
HP Smart Array errors
Controller board runtime LEDs
Immediately after you power up the server, the controller runtime LEDs illuminate briefly in a predetermined
pattern as part of the POST sequence. At all other times during server operation, the illumination pattern of
the runtime LEDs indicates the status of the controller. To determine the controller status, see the appropriate
controller-specific section.
P222 LEDs
Item Color Name Interpretation
1
Green
Heartbeat
When the controller is in good health, this LED flashes at 1 Hz.
During power up, this LED is solid for up to 2 seconds.
2
Red Fault When an error occurs, this LED is on. During power up, this LED
is solid for up to 2 seconds.
3
Amber Debug On = Controller is in reset.
Off = Controller is in an idle or runtime state.
Flashing 5 Hz = Controller and cache are performing a backup.