HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 105
Message Id: 24579
Severity: Informational
Log message: An event queue overflow has occurred for the array controller
<controller name / slot information>. At least one event has been lost. This
controller will only queue up to 100 events.
Message Id: 24580
Severity: Error
Log Message: The HP Smart Array SAS/SATA Event Notification Service needs to be
upgraded and cannot process events at this time. The service is being stopped
and processing of HP Smart Array controller events to the Windows system event
log, ProLiant Integrated Management Log (IML) and Integrity System Event Log (SEL)
will not occur until the software is updated.
To upgrade your software, please visit
http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers
Message Id: 24581
Severity: Informational
Log message: The HP Smart Array SAS/SATA event notification service <status
message>.
<status message> values:
• “has encountered an error and has stopped”
• “has stopped due to a message file error”
• “was not able to update the service control manager with updated status”
• “cannot open a registry parameter key”
• “cannot start due to system event logging being disabled”
Message Id: 24582
Severity: Informational
Log message: A <drive type> physical drive located in bay <bay number> was <inserted
/ removed>. The drive can be found in box <box number> which is attached to port
<port number> of array controller <controller name / slot information>.
Message Id: 24583
Severity: Informational
Log message: Array controller <controller name / slot information> has detected more
than one cable with active drives attached.
Message Id: 24584
Severity: Warning
Log message: Too many runtime ECC errors have been received from the array controller
<controller name / slot information>. The controller has restarted without
utilizing its DIMM.
Message Id: 24585
Severity: Warning