HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 130
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24703
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that fan number <fan number> is now operational.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24704
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is indicating that sensor number <sensor number> has reported
that the internal temperature has exceeded the preset temperature limit. The
external Smart Array controller may attempt to shut down power to and/or spin
down the installed disk drive(s).
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24705
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is indicating that sensor number <sensor number> has reported
that the internal temperature is nearing the preset temperature limit. The
external Smart Array controller may enact precautionary measures to prevent data
loss should the temperature reach the operating limit.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24706
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is indicating that sensor number <sensor number> has reported
that a previously existing temperature condition has been corrected. All of the
temperature sensors in the attached box are now reporting acceptable temperature
levels.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24707
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that redundant power supply number <power supply
number> has reported a fault.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24708
Severity: Informational