HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

Microsoft Windows Event ID and SNMP traps 324
• cpqHoTrapFlags
• cpqSasHbaHwLocation
• cpqSasPhyDrvLocationString
• cpqSasPhyDrvHbaIndex
• cpqSasPhyDrvIndex
• cpqSasPhyDrvStatus
• cpqSasPhyDrvType
• cpqSasPhyDrvModel
• cpqSasPhyDrvFWRev
• cpqSasPhyDrvSerialNumber
• cpqSasPhyDrvSasAddress
Supporting SNMP Trap Description: “Status is now [cpqSasPhyDrvStatus].”
NT Event ID: 1222 (Hex)0x843504c6 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SAS/SATA Logical Drive Status Change.
Log Message: Logical drive number %5 on the HBA in %4 has a new status of %6.
SNMP Trap: cpqSasLogDrvStatusChange - 5023 in CPQSCSI.MIB
Symptom: Logical Drive Status Change. The Storage Agent has detected a change in the status of a SAS or
SATA logical drive. The current logical drive status is indicated in the cpqSasLogDrvStatus variable.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSasHbaHwLocation
• cpqSasLogDrvHbaIndex
• cpqSasLogDrvIndex
• cpqSasLogDrvStatus
• cpqSasLogDrvOsName
Supporting SNMP Trap Description: “Status is now [cpqSasLogDrvStatus].”
NT Event ID: 1223 (Hex)0x843504c7 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SAS Tape Drive Status Change.
Log Message: The tape drive in %4, %5 with serial number "%6", has a new status of %7. (Tape Drive status
values: 1=other, 2=ok, 3=offline)
SNMP Trap: cpqSas2TapeDrvStatusChange - 5025 in CPQSCSI.MIB
Symptom: The Storage Agent has detected a change in the status of a SAS tape drive. The current tape drive
status is indicated in the cpqSasTapeDrvStatus variable.