HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP ProLiant server errors 75
* I/O modules are not cabled for good fault tolerance
* Redundant I/O paths exist due to direct loopback of controller ports
* Redundant I/O module supported and unsupported storage boxes are cabled together.
* Refer to product user guide
Audible Beeps: None
Possible Cause: Incorrect redundant cabling configuration
Action: For information on how to cable the device in a supported manner for dual-domain redundant path
support, see the product user guide.
1742-Slot X Drive Array - Previously Ejected Drive(s) Detected...
The logical drive(s) will remain unavailable until re-enabled by the Array Configuration Utility. Port x Box y Bay(s) z.
Audible beeps: None
Possible cause: The system detects that the drives are still present during POST and that the user previously
requested the drives to be removed from the controller configuration information.
Action: Do one of the following:
• If the drives will be removed at a later time, to continue ignoring the physical drives, press F1.
• To cancel the remove request and add these physical and logical drives back to the controller, press F2.
• To re-enable the drives, use ACU.
1743-Slot X Drive Array - Logical Drive Erase Operation in Progress...
...Logical drives being erased are temporarily offline.
Audible Beeps: None
Possible Cause: The drives being erased are offline.
Action: Do one of the following:
• Wait for the erase process to complete before using the logical drive.
• Abort the erase process using ACU.
1743-Slot X Drive Array - Logical Drive Erase Operation(s) are Queued...
...Logical drives will temporarily go offline while being erased.
Audible Beeps: None
Possible Cause: The drives being erased are offline.
Action: Do one of the following:
• Wait for the erase process to complete before using the logical drive.
• Abort the erase process using ACU.
1744-Slot X Drive Array - Drive Erase Operation In Progress (or Queued)...
...The following disk drive(s) will be blank upon completion: (followed by a list of drives)