Compaq ProLiant ML370 G2 Service Update

Compaq ProLiant ML370 G2 Service Update 15
Rev. 1.0 Page 15 of 18
System Board
Step Action
1.
Power down the server.
2.
Unlock the front bezel (tower server only).
3.
Remove the access panel.
4.
Remove the redundant fan cage, if installed.
5.
Remove all expansion boards.
6.
Remove the dividers.
7.
Remove the center wall.
8.
Remove all cable connections.
9.
Loosen the two thumbscrews securing the system board to the chassis .
10.
Slide the system board toward the front of the chassis to release it from the seven retaining
guides .
11.
Lift the system board out of the chassis and tilt it to one side to clear the cable guide .
IMPORTANT: For safety and improved serviceability, reinstall the PCI Hot Plug divider base
when replacing the system board.