Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers

ManualsBrandsHP ManualsServerHP ProLiant ML370 Server

Integration Note

Help us improve our technical communication. Let us know what you think

about the technical information in this document. Your feedback is valuable

and will help us structure future communications. Please send your

comments to:

CompaqNT@compaq.com

October 2000

13J6-1000A-WWEN

Prepared by OS Integration

Engineering

Compaq Computer Corporation

Contents

Introduction..................................3

Requirements...............................3

Minimum Requirements.............4

Required Information..................5

Additional Information ................5

Creating Compaq Server

Support for Microsoft

Windows NT 4.0 Diskettes ..........6

Using SmartStart Release

4.23 or Later...............................6

Using SmartStart Release

4.22 or Earlier ............................8

Installation Instructions ............10

Part 1: Starting the Microsoft

BackOffice SBS Installation .....10

Part 2: Completing the

Microsoft BackOffice SBS

Installation................................17

Updating Compaq Support

Software .....................................21

Microsoft BackOffice Small

Business Server 4.5 Installation

Instructions for Compaq

Prosignia and ProLiant Servers

Abstract: This document provides instructions for installing the

Microsoft BackOffice Small Business Server (SBS) 4.5 software on

specified Compaq Prosignia and ProLiant servers.

The Microsoft BackOffice SBS 4.5 software does not supply the

necessary drivers for the following Compaq servers: Compaq

Prosignia Server 720, Prosignia Server 740, Compaq ProLiant 400,

ProLiant 800, ProLiant 1600, ProLiant 1850R, ProLiant ML330,

ProLiant ML350, and ProLiant ML370. This document provides

step-by-step instructions to identify and to install the necessary

drivers, allowing successful completion of the Microsoft BackOffice

SBS software installation.

Note: This document describes the installation instructions for

Microsoft BackOffice SBS 4.5 only. For Microsoft BackOffice SBS

4.0/4.0(a) installation instructions, search the Compaq website for

additional white papers.

Summary of content (22 pages)

PAGE 1
Integration Note October 2000 13J6-1000A-WWEN Prepared by OS Integration Engineering Compaq Computer Corporation Contents Introduction..................................3 Requirements...............................3 Minimum Requirements .............4 Required Information..................5 Additional Information ................5 Creating Compaq Server Support for Microsoft Windows NT 4.0 Diskettes ..........6 Using SmartStart Release 4.23 or Later...............................
PAGE 2
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 2 Notice ©2000 Compaq Computer Corporation. Compaq, the Compaq logo, Compaq Insight Manager, NetFlex, ProLiant, ROMPaq, and SmartStart are registered United States Patent and Trademark Office.
PAGE 3
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers Introduction This document provides instructions for installing Microsoft BackOffice SBS 4.5 on the following Compaq servers: • Prosignia Server 720 • Prosignia Server 740 • ProLiant 400 • ProLiant 800 • ProLiant 1600 • ProLiant 1850R • ProLiant ML330 • ProLiant ML350 • ProLiant ML370 These instructions do not apply to other Compaq server models.
PAGE 4
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers Minimum Requirements Table 1 and Table 2 list the minimum hardware and software requirements. Table 1.
PAGE 5
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 5 Required Information Table 3 lists additional information you need to know for the installation. Table 3. Information required for installation √ Information ! Name of licensee for the Microsoft BackOffice Small Business Server 4.
PAGE 6
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 6 Creating Compaq Server Support for Microsoft Windows NT 4.0 Diskettes Compaq Server Support for Microsoft Windows NT 4.0, also referred to as the Compaq SSD for Windows NT, is required for the Microsoft BackOffice SBS 4.5 software installation. This section provides two sets of instructions.
PAGE 7
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers Table 5. Creating SSD for Windows NT 4.0 diskettes using SmartStart 4.23 or later (continued) √ Procedures ! Creating support software diskettes Steps 1. From the Diskette Builder window, click Create Support Software. 2. From the Integration Server Selection window, select Create software diskettes from CD only. Then, click Next. 3. Expand the Compaq tree. 4.
PAGE 8
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers Using SmartStart Release 4.22 or Earlier If you use Compaq SmartStart and Support Software CD Release 4.22 or earlier to create the Compaq SSD for Windows NT 4.0 diskettes, refer to the procedures included in Table 6. Note: Use the following procedures for Prosignia Server 720 and ProLiant 400 only. Table 6. Creating SSD for Windows NT 4.
PAGE 9
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers Table 6. Creating SSD for Windows NT 4.0 diskettes using an earlier version of SmartStart (continued) √ Procedures ! Creating support software diskettes (continued) Steps 7. Click Finish to exit the Diskette Builder Utility. 8. Click Exit. 9. Click OK to exit the upgrade process. 10. Insert the Server Profile diskette when prompted, then click OK. 11.
PAGE 10
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 10 Installation Instructions The installation instructions are comprised of two parts: (1) starting the Microsoft BackOffice SBS installation, and (2) completing the Microsoft BackOffice SBS installation. Each part divides the procedures into tasks, providing detailed information and check boxes to guide you through the installation process.
PAGE 11
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 11 Table 7. Initial Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 1: Steps 7. Starting the installation (continued) Insert the appropriate Compaq SSD for Windows NT diskette. Note: To help you determine which diskette to use, locate the appropriate SCSI driver on the Compaq SSD for Windows NT list of contents that you obtained from the NTREADME.
PAGE 12
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 12 Table 7. Initial Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 2: Steps 4. Choosing disk carving options (continued) Do one of the following: • Press Enter to install Microsoft BackOffice SBS 4.5. Then, " Select Format the partition using NTFS file system. " Press Enter to continue. The setup process formats the partition.
PAGE 13
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 13 Table 7. Initial Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 3: Steps 4. Installing the operating system (continued) If no modem is installed: • You may get a Setup Message window, displaying the following: Remote Access is not configured with any ports. You have an invalid RAS configuration. • Click OK to continue.
PAGE 14
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 14 Table 7. Initial Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 3: Steps 10. If no modem is installed: Installing the operating system (continued) ! Task 4: Installing and configuring modem drivers • Click Cancel on the Installed Modems window, which will not display a modem name. • Click Yes when asked if you want to cancel.
PAGE 15
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers Table 7. Initial Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 4: Installing and configuring modem drivers (continued) Steps 11. Click OK when the Modem Setup window appears indicating the system must be restarted before using the modem. The Location Information window appears. 12. Supply the appropriate information in the Location Information window.
PAGE 16
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 16 Table 7. Initial Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 5: Completing the initial process Steps 1. Click Cancel if the Installed Modems window appears. 2. Click Yes to confirm the cancel. 3. Click Yes when prompted to continue the setup program after the next restart. 4. Do the following if the specified Display windows appear: 5.
PAGE 17
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers Part 2: Completing the Microsoft BackOffice SBS Installation The Microsoft BackOffice SBS 4.5 software may incorrectly identify your onboard network interface controller (NIC). Before you can continue with the Microsoft BackOffice SBS 4.5 installation, perform the steps in Task 6 in Table 8 to select the correct Compaq network controller.
PAGE 18
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 18 Table 8. Final Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 6: Selecting the correct network interface controller (NIC) (continued) Steps 6. Select the Bindings tab to update the system settings. 7. Select the Protocol tab to set the IP address. The system displays the network protocol. 8. 9. Click Properties (once or twice).
PAGE 19
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 19 Table 8. Final Microsoft BackOffice SBS installation procedures (continued) √ Procedures Steps ! Task 7: 1. Completing the Microsoft BackOffice SBS software installation (continued) 2. Click Next to continue. A message may appear indicating the video card should display at least 16 colors. Click OK to continue.
PAGE 20
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 20 Table 8. Final Microsoft BackOffice SBS installation procedures (continued) √ Procedures Steps ! Task 7: 13. Completing the Microsoft BackOffice SBS software installation (continued) 14. Remove CD #2 and insert Microsoft BackOffice SBS 4.5 operating system CD #3, when prompted. The system continues to install the components.
PAGE 21
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 21 Table 8. Final Microsoft BackOffice SBS installation procedures (continued) √ Procedures ! Task 9: Completing the final steps Steps Note: After the system restarts, remember to change the Administrator password, which was set to blank in Task 7. To change the password, see the online Help for instructions. 1. 2.
PAGE 22
Microsoft BackOffice Small Business Server 4.5 Installation Instructions for Compaq Prosignia and ProLiant Servers 22 Smart Components, each package consisting of a wrapped component with its installation logic into a single, installable (interactive or silent) executable file. To obtain the appropriate Compaq support software for your system, follow these procedures: 1. Go to the Compaq Support Software website (http://www.compaq.com/support/files/server/us/index.html). 2.