Compaq ProLiant ML530 Setup and Installation Guide

Installing Hardware Options 2-23
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: c-ch2 Installing Hardware.doc Last Saved On: 6/13/00 12:29 PM
9. Connect the SCSI cables on the SCSI backplane board. See Chapter 5,
“Cabling Guidelines,” for more information on SCSI cabling.
NOTE: To aid in locating the proper cable connections, the cables and system board are
color coded as follows:
■ Blue = SCSI A
■ Yellow = SCSI B
Figure 2-21. Cabling connection to the SCSI controller
10. Push the drive cage back fully and install four Torx T-15 screws to
secure the drive cage.
11. Replace the drive air baffle.
12. Replace the access panel.
13. Reconnect the power cords.
14. Power up the server. See Chapter 3, “Server Installation.”