Compaq ProLiant ML530 Setup and Installation Guide

3-16 Compaq ProLiant ML530 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: d-ch3 Installation.doc Last Saved On: 6/15/00 9:02 AM
4. Put the component rails to one side. You will attach them to the rack
server chassis later in the section, “Attaching Component Rails to the
Server.”
The next figure shows the separated bracket rail with its inner sliding
piece and the flat, one-piece component rail.
Figure 3-9. Separated ProLiant ML530 bracket rail (top) and component rail
The bracket rail consists of a fixed outer rail that screws to the rack
mounting bracket, and an inner slide on a steel ball bearing movement.
This inner slide does not detach.
Figure 3-10. Bracket rail with inner slide (the front of the rail is highlighted)