ProLiant ML530 Servers Maintenance and Service Guide
Table Of Contents
- Compaq ProLiant ML530 Servers Maintenance and Service Guide
- Notice Page
- Table of Contents
- About This Guide
- Chapter 1: Illustrated Parts List
- Chapter 2: Removal and Replacement Procedures
- Electrostatic Discharge Information
- Symbols on Equipment
- Preparation Procedures
- Tower Model Front Bezel Door
- RackMount Bezel
- Access Panel
- Fans
- Removable Media and Mass Storage Devices
- Cable Routing Diagrams
- System Board Tray
- System Board Components
- HotPlug Power Supplies
- Power Backplane Board
- Power On/Standby Switch
- Chapter 3: Diagnostics and Troubleshooting
- Diagnostic Tools Utility Overview
- Default Configuration
- Utilities Access
- PowerOn SelfTest
- Diagnostics Software
- Steps for Diagnostics
- 100–199, Primary Processor Test Error Codes
- 200–299, Memory Test Error Codes
- 300–399, Keyboard Test Error Codes
- 400–499, Parallel Printer Test Error Codes
- 500–599, Video Display Unit Test Error Codes
- 600–699, Diskette Drive Test Error Codes
- 800–899, Video Board Test Error Codes
- 1100–1199, Serial Test Error Codes
- 1200–1299, Modem Communications Test Error Codes
- 1700–1799, Hard Drive Test Error Codes
- 1900–1999, Tape Drive Test Error Codes
- 2400–2499, Advanced VGA Board Test Error Codes
- 6000–6099, Compaq NIC Boards Test Error Codes
- 6500–6599, SCSI Hard Drive Test Error Codes
- 6700–6799, SCSI Tape Drive Test Error Codes
- 8600–8699, Pointing Device Interface Test Error Codes
- Array Diagnostic Utility
- Integrated Management Log
- Rapid Error Recovery
- Remote Service Features
- ROMPaq Error Recovery Options
- Compaq Insight Manager
- Chapter 4: Connectors, Switches, Jumpers, and LED Indicators
- Chapter 5: Physical and Operating Specifications
- Index

5-2 Compaq ProLiant ML530 Servers Maintenance and Service Guide
System Unit
Table 5-1
System Unit Specifications
Dimensions
Height 51.5 cm (20.3 inch)
Depth 69.7 cm (27.5 inch)
Width 32.6 cm (12.9 inch)
Weight 45 kg, minimum (100 lb, minimum)
International input requirements
Rated input voltage 200 to 240 V
Rated input frequency 50 to 60 Hz
Rated input current 3.8 A
U.S. input requirements
Rated input voltage 100 to 120 V
Rated input frequency 50 to 60 Hz
Rated input current 7.6 A
Power supply output power
Rated steady-state power 450 W
Maximum peak power 450 W
Temperature range
Operating 10° to 35°C (50° to 95°F)
Nonoperating -30° to 60°C (-20° to 140°F)
Relative humidity (noncondensing)
Operating 20% to 80%
Nonoperating 5% to 90%
Maximum wet bulb temperature 38.7°C (101.7°F)
Heat dissipation 2400 BTU/h maximum










