ProLiant ML530 Servers Maintenance and Service Guide
Table Of Contents
- Compaq ProLiant ML530 Servers Maintenance and Service Guide
- Notice Page
- Table of Contents
- About This Guide
- Chapter 1: Illustrated Parts List
- Chapter 2: Removal and Replacement Procedures
- Electrostatic Discharge Information
- Symbols on Equipment
- Preparation Procedures
- Tower Model Front Bezel Door
- RackMount Bezel
- Access Panel
- Fans
- Removable Media and Mass Storage Devices
- Cable Routing Diagrams
- System Board Tray
- System Board Components
- HotPlug Power Supplies
- Power Backplane Board
- Power On/Standby Switch
- Chapter 3: Diagnostics and Troubleshooting
- Diagnostic Tools Utility Overview
- Default Configuration
- Utilities Access
- PowerOn SelfTest
- Diagnostics Software
- Steps for Diagnostics
- 100–199, Primary Processor Test Error Codes
- 200–299, Memory Test Error Codes
- 300–399, Keyboard Test Error Codes
- 400–499, Parallel Printer Test Error Codes
- 500–599, Video Display Unit Test Error Codes
- 600–699, Diskette Drive Test Error Codes
- 800–899, Video Board Test Error Codes
- 1100–1199, Serial Test Error Codes
- 1200–1299, Modem Communications Test Error Codes
- 1700–1799, Hard Drive Test Error Codes
- 1900–1999, Tape Drive Test Error Codes
- 2400–2499, Advanced VGA Board Test Error Codes
- 6000–6099, Compaq NIC Boards Test Error Codes
- 6500–6599, SCSI Hard Drive Test Error Codes
- 6700–6799, SCSI Tape Drive Test Error Codes
- 8600–8699, Pointing Device Interface Test Error Codes
- Array Diagnostic Utility
- Integrated Management Log
- Rapid Error Recovery
- Remote Service Features
- ROMPaq Error Recovery Options
- Compaq Insight Manager
- Chapter 4: Connectors, Switches, Jumpers, and LED Indicators
- Chapter 5: Physical and Operating Specifications
- Index
Index 9
M
maintenance and service guide, part
number 1-6
maintenance switch
setting 4-4
mass storage devices
location 2-19
maximum number
supported 2-19
memory
diagnostic LED, viewing 4-8
installation guidelines 2-38
installation order 2-38
maximum supported 2-38
part numbers 1-5
removing 2-39
removing, illustrated 2-39
replacing 2-38, 2-39
socket locations, illustrated 2-38
sockets, identified 2-34, 4-3
specifications 5-4
speed 5-4
standard 2-38
test error codes 3-26
upgrade requirements 5-4
memory errors
recorded to log 3-65
miscellaneous
hardware kit, part number 1-5
plastics kit, part number 1-5
power cable kit, part
number 1-6
signal cable kit, part number 1-6
modem
test error codes 3-31
when used with ASR-2 3-57
mouse
connector, identified 4-2
interface, identified 2-34, 4-3
N
Netelligent Management,
defined 3-72
network
access, configuring ASR-2
for 3-61
card slot, selecting 3-63
frame type, selecting 3-63
host name, setting 3-63
interface fault recovery,
defined 3-68
IP address, setting 3-63
IP net mask, setting 3-63
IP router address, setting 3-63
protocol, setting 3-62
Network Interface Controller See
NIC
NIC
part number 1-5
test error codes 3-35
non-hot-plug devices, removing 2-5
NVRAM, clearing 3-71
O
operating specifications 5-1
operating system, booting into 3-63
operating temperatures
system unit
specifications 5-2
operating unit without covers
cautions 2-7
optional hardware,
specifications 5-1
overheating
cautions 2-7
overview
Diagnostics 3-2
P
pager
booting Compaq Utilities
from 3-61
serial interface, selecting 3-62
setting dial string 3-61
setting message 3-61
settings 3-61
testing 3-62
panel, access
removing 2-10
removing, illustrated 2-10
replacing 2-10
parallel port, identified 2-34, 4-2,
4-3
parallel printer, test error codes 3-27
part numbers
access panel 1-3, 1-6
casters 1-6
CD-ROM drive 1-3
chassis 1-3, 1-6
conversion kit 1-6
country kit 1-6
cover kit 1-6
cover kit, rack 1-3
diskette drive 1-3
fans
drive 1-5
system 1-5
front bezel door 1-6










