HP ProLiant ML570 Generation 2 Server Memory Installation Guide

Memory
Software
The following software components of the memory system provide memory
configuration and management capabilities:
•
•
ROM-Based Setup Utility (RBSU)
Insight Manager 7
IMPORTANT: The optional online spare memory, single-board mirrored memory, and
hot-plug mirrored memory features do not require special software drivers and are operating
system independent.
Configuring the Memory
Configuring the memory system of the server requires configuring both hardware and
software. To configure the memory:
1. Remove the memory board. Refer to “Removing a Memory Board” in this
chapter.
2. Install the required DIMMs based on your desired memory configuration. Be
sure to follow all DIMM installation requirements. Refer to “DIMM Installation
Requirements” for your desired memory configuration in this chapter.
3. Install the memory board. Refer to “Installing a Memory Board” in this chapter.
HP ProLiant ML570 Generation 2 Server Memory Installation Guide 1-21
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: b-ch1 Memory.doc
Codename: Seabiscuit Part Number: 279987-003 Last Saved On: 5/8/03 8:58 AM