HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing the Tower Server
6-8 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: g-ch6 Installing the Tower Server.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 11:12 AM
7. Follow the instructions provided by the SmartStart software or the operating
system manufacturer.
For more information about using RBSU or the SmartStart software to install an
operating system, refer to Chapter 8, “Server Configuration and Utilities.”
After RBSU configures your hardware for the first time, use the SmartStart software
to install the operating system of your choice.
For the most current information about operating system support on the servers, refer
to the operating system support matrix available at the FTP site:
ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf
Registering the Server
You can register the server with the forms provided with the server or from the
website:
www.hp.com/servers/proliant/manage
Routine Maintenance
The HP ProLiant ML570 Generation 2 Maintenance and Service Guide provides
specific information required for general maintenance and component replacement,
including:
• Spare part numbers
• Removal and replacement procedures
• Diagnostic tools
The HP ProLiant ML570 Generation 2 Maintenance and Service Guide can be
accessed through the Documentation CD or the website:
www.hp.com/servers/proliant/manage