PCI Bus Numbering in a Microsoft Windows NT Environment

PCI Bus Numbering in a Microsoft Windows NT Environment 51
13UK-1200A-WWEN
Appendix C, Reestablishing Network
Connections on Retired Compaq ProLiant
Servers
The following section describes one Compaq utility that provides assistance in verifying
connections and reestablishing network links.
Compaq TLAN Teaming and Configuration Utility
This utility, a network-monitoring tool that provides a method of resetting network controllers
and NetFlex-3 drivers when modifications are made to controller slot installation(s), displays PCI
bus numbers, bus type, and slot numbers associated with each device.
Access the applet from the Windows NT Control Panel; the icon is labeled Compaq NetFlex. This
utility is installed from the Compaq Support Paq for Microsoft Windows NT 4.0, if the system
contains Compaq ThunderLAN-based network controllers.
The following table lists supported Compaq Netelligent and NetFlex-3 NICs for the Compaq
TLAN Teaming and Configuration Utility:
Table 17. Supported TLAN NICs
TLAN Stand Up NICs TLAN Embedded NICs
NetFlex 3 EISA IC, SM,TLAN 10/100,REV3.03,TQF
NetFlex 3 100Base-TX Module IC, SM,TLAN 10/100,REV3.03PQFP
NetFlex 3/P PCI UTP-BNC IC, SM, TLAN 3.14 TQFP
Netelligent 10/100 TX PCI UTP IC, SM,10/100TLAN 2.3,OPT
Netelligent 10 T PCI UTP
Netelligent Dual 10/100 TX PCI UTP
NetFlex 3 100Base FX Module
Netelligent 10 T/2 PCI UTP/Coax
NetFlex 3/P PCI UTP-BNC
Visit the Compaq website for a complete list of supported controllers at
http://www.compaq.com/products/networking/nics/
.
This utility is packaged in the Smart Component called Compaq NetFlex/Netelligent Adapter
Driver, which is available as an individual component and within the Compaq Support Paq on the
Compaq SmartStart and Support Software CD and on the Compaq website at
http://www.compaq.com/support/files/server/us/index.html
.