HP ProLiant SL160s G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 45
Figure 21 The top of the processor
To install the PCI air baffle:
NOTE: The PCI air baffle is required for proper thermal solution. Need to install a PCI air baffle
before installing the heat sink.
1. Align the PCI air baffle facing the hole on the system board and installed it as described in
below figure.
Figure 22 Installing the PCI air baffle
To install the heat sink:
CAUTION: To prevent overheating or a possible system crash, use only a heat sink model specified
for the HP ProLiant SL160s Generation 6 server.
2. Put the heat sink frame on the CPU socket.
3.Properly align the heat sink mounting pins to the system board mounting holes.
4.Tighten the mounting pins clockwise to secure the heat sink connection to the system board.