HP ProLiant SL160s G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 47
Figure 24 DIMM slots
Refer to the below table for Memory Module installing:
Memory Module Population Order
Population
order
A B C D E F G H I
Memory
socket
3 6 9 2 5 8 1 4 7
NOTES:
•
Installation guide for 1P configuration:
○ Follow the sequence of 3A, 6B, 9C, 2D, 5E, 8F, 1G, 4H, and 7I for the
corresponding processor when installing the memory.
•
Installation guide for 2P configuration:
○ Follow the sequence of 3A, 6B, 9C, 2D, 5E, 8F, 1G, 4H, and 7I for the
corresponding processor when installing the memory.
○ Install at least one memory DIMM for each processor.
○ The memory quantity installed for each processor can be different.
○
The DIMM slot 1 should be the closest one of the processor.
To remove memory module:
1. Completely open the holding clips securing the module.
2.Gently pull the memory module upward to remove it from the slot.