HP ProLiant SL160s G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 50
Remove PCIe bracket assembly
To remove the PCIe bracket with PCIe riser cards:
1. Loosen the screws securing the PCIe bracket to the chassis.
2. Pull the riser card away together with the bracket.
Figure 29 Removing the PCIe riser card assembly
Install PCIe bracket assembly
To install the PCIe bracket with PCIe riser cards:
1. Align the riser card connector with the slot on the system board and then inset the assembly into
the slot.
2. Fasten the screws to secure the bracket assembly to the tray.