HP ProLiant SL160s G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 52
NOTE: The CPU air baffle is required for proper thermal solution.
To install the CPU air baffle:
1. Align the CPU air baffle to the tray.
2. Secure the latches to the tray as described in below figure.
3. Press down the CPU air baffle to install it and make sure it full connects to the tray.
Figure 32 Installing the CPU air baffle into the tray
System Battery
The server uses nonvolatile memory that requires a battery to retain system information when power is
removed.
This 3-volt lithium coin cell battery is located on the system board.