HP ProLiant SL160s G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 54
Figure 34 Replacing the battery
System Board Removal and Replacement Procedure
Remove the system board from the tray:
1. Remove the nine screws that secure the system board to the tray.
2.Release the system board from the tray.
Figure 35 Removing the 160 system board from the tray
To install the 160 system board:
1. Put the system board in the chassis. The nine screw holes on the chassis should align with the
system board.
2.Fasten the nine screws on the system board to secure the system board to the chassis.