HP ProLiant SL160s G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 59
Figure 44 System fan connection
Device number
Connector
System fan 1, 2, 3, 4 J14, J12, J22 on the AC power board
System fan 5, 6, 7, 8 J19, J16, J18 on the AC power board
A new system fan can be installed to allow the server to operate properly in case a default system fan
becomes defective.
To remove the system fan:
1. Squeeze the two release tabs on the system fan together to release it from the chassis.
2. Lift the system fan away from the chassis.
Figure 45 Removing the system fan
To replace the system fan:
1. Insert the system fan into the chassis.