HP ProLiant SL160s G6 Server Software Configuration Guide

System BIOS configuration 17
USB Configuration submenu
Figure 11 USB Configuration submenu
NOTE: When you install USB storage, USB Mass Device Configuration items are displayed. From
this item, you can get some information about the device, some information you can configure it if
needed.
Table 8 USB Configuration submenu fields
Field
Description
Options
USB Functions Enable USB Functions. Enabled
Disable USB Functions. Disabled
Legacy USB
Support
Enables support for legacy USB. Enabled
Disables support for legacy USB. Disabled
Disables legacy support if no USB devices are connected. Auto
USB 2.0 Controller Enable USB 2.0. Enabled
Disable USB 2.0 Disabled
USB 2.0 Controller
Mode
Configure the USB 2.0 controller in HiSpeed (480Mbps). HiSpeed
Configure the USB 2.0 controller in FullSpeed(12Mbps). FullSpeed
BIOS EHCI Hand-
Off
This is a workaround for OSes without EHCI hand-off support. The EHCI
ownership change should claim by EHCI driver.
Enabled
Disabled
Hotplug USB FDD A dummy FDD device is created that will be associated with the hotplugged Auto