HP ProLiant SL160s G6 Server Software Configuration Guide

System BIOS configuration 29
Table 18 BIOS Serial Console Configuration submenu fields
Field
Description
Options
Select Serial Port setting as 57600 8,n,1 57600 8,n,1
Select Serial Port setting as 19200 8,n,1 19200 8,n,1
Select Serial Port setting as 09600 8,n,1 09600 8,n,1
Flow Control No flow control None
Enable RTS/CTS hardware flow control Hardware
Enable RTS/CTS software flow control
Software
Redirection After
BIOS POST
Turns off the redirection after POST Boot Loader. Disabled
Redirection is active during POST and during Boot Loader. Boot Loader
Redirection is always active. (Some OSes may not work if set to
Always)
Always
Thermal Type
Select the target terminal type as ANSI.
ANSI
Select the target terminal type as VT 100. VT 100
Select the target terminal type as VT-UTF8. VT-UTF8
VT-UTF8 Combo Key
Support
Disable VT-UTF8 Combination Key Support for ANSI/VT100 terminals. Disabled
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals. Enabled
Sredir Memory
Display Delay
Gives no delay to display memory information. No Delay
Gives the delay in 1 Second to display memory information. Delay 1 Sec
Gives the delay in 2 Second to display memory information. Delay 2 Sec
Gives the delay in 4 Second to display memory information. Delay 4 Sec