HP ProLiant SL160s G6 Server Software Configuration Guide

System BIOS configuration 31
Boot Menu
Figure 25 Boot Menu
Table 19
Boot menu fields
Field Description
Boot Settings
Configuration
Sets which options to run during system boot up. Press Enter to access the related submenu.
For details on the submenu options, see the “Hard Disk Drives configuration submenu”
section.
Standard Boot
Order
Specifies the Boot Device Priority sequence.
Hard Disk Drives
Specifies the boot Device Priority sequence from available Hard Drives.
USB Device Boot
Priority
BIOS Setup option (when set to “Low”) to disallow newly inserted USB devices from
automatically showing up as top priority within their device class in the standard boot order
list. This is needed so that the user can configure the BIOS to avoid attempting to boot non-
bootable USB devices that are left plugged into the server during POST. The default value is
High.
Restore on AC
Power Loss
Last state: Set this value to restores previous power state before loss occurred.
Power on: Set this value to always boot when AC power is restored.
Power off:
Set this value to keep power off until the power button is pressed.
Standard Boot Order submenu
To change the boot order, select a boot category type such as Hard disk drives, Removable media or
ATAPI CD ROM devices from the boot menu. For example, if the 1st boot device is set to Hard disk
drives, then BIOS will try to boot to hard disk drives first.