HP ProLiant SL160s G6 Server Software Configuration Guide

System BIOS configuration 36
To change the Admin Password:
1. In the Security menu screen, in the Change Admin Password field, press Enter. The Enter New
Password displays. Type a new password in the Enter New Password box.
2. Type the same password in the Confirm New Password box to verify the first entry, then press
Enter. The Password Installed OK is displayed. Press Enter to finish.
To check the administrator password:
1. In the Security menu screen, select Password Check, and then press Enter.
2. Select one of the available options and then press Enter.
Figure 32 Password Check submenu
Table 20 Password Check submenu fields
Option Description
Setup Set this value need to check password while invoking the set up utility.
Always Set this value must check password while invoking setup on each boot.