HP Smart Update Manager 6.0.0 User Guide

Error reporting
If errors occur in the input file, HP SUM exits with a return value of –2 (bad parameter). The details
of the location and nature of the error are recorded in
hpsum_execution_log_<date>_<time>.raw.
Input file parameters
Possible valuesDescriptionParameter
YES, NOThis parameter causes the installation
to run silently without GUI or console
SILENT
output. All data is written to the log
file. Any generated prompts use the
default option and continue the
installation without user input.
If a component requires input before
installation (such as configuration
information), the component
installation fails (unless the
IGNOREERRORS =
"FailedDependencies" parameter is
supplied), and an error message is
written to the log file.
/targettype vcThis parameter specifies the node type
and can shorten the inventory process.
TARGETTYPE
The following are valid node types:
• Server
• Windows
• Linux
• HPUX
• EVA or Command View for
EVA
• FC Switch or Fibre
Channel Switch
• OA or Onboard
Administrator
• SUPERDOME 2 or
SUPERDOME2 or Superdome
2 Onboard Administrator
• iLO
• VC or Virtual Connect
• HP SAS or HP SAS B/L
Interconnect Switch
• VMware or VMware Host
• iPDU or Intelligent
Power Distribution Unit
(iPDU)
If you use the command with a
group, the HP SUM assumes all
nodes in the group are the same
node type.
YES, NOForces updates to both firmware and
software components.
FORCEALL
YES, NOForces updates to firmware
components.
FORCEROM
50 Using legacy scripts to deploy updates